Toyotomi GAN-A28IVL User Manual page 8

Operation of Remote Controller
MODE icon
17
If MODE button is pressed,
current operation mode icon
AUTO,
DRY,
only for heat pumpmodels) will show.
SLEEP icon
18
is displayed by pressing
the SLEEP button. Press this
button again to clear the display.
LIGHT icon
19
is displayed by pressing the
LIGHT button. Press LIGHT button
again to clear the display.
TEMP icon:
20
Pressing TEMP button,
(set temperature),
(indoor ambient temperature)
(outdoor ambient temperature)
and blank is displayed circularly.
NOTE: function is applicable to
partial of models.
This function is not available for this model
17
18 19 20 21
COOL,
FAN or HEAT
25
24
23
22
Up & down swing icon
21
is displayed when pressing
the up & down swing down button.
Press this button again to clear the
display.
LOCK icon
22
is displayed by pressing "+"
and "-" buttons simultaneously. Press
them again to clear the display.
SET TIME display
23
After pressing TIMER button,ON or
OFF will blink.This area will show
the set time.
DIGITAL display
24
This area will show the set temperature.
In SAVE mode, " SE" will be displayed.
AIR icon
25
is displayed when pressing the
AIR button. Press this button again
to clear the display.
Note: This function is not applicable
to partial of models.
This function is not available for this model.
8
GB