Parking Brake Lever Assembly Installation (continued)
Handle Replacement
Handle Removal
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g298359
3. Install the 1/4–20 inch nylock nut to 1/4–20 carriage bolt securing the parking
brake assembly to the handle. Torque nut to carriage bolt to 40 ± 7 in-lbs.
(4 ± 1 Nm).
g298358
1. Park the machine on a level surface. Stop the engine and wait for all moving
parts to stop. Shut the fuel off.
2. Remove the grass bagger assembly if attached.
3. Cut the zip tie.
Figure 112
Figure 113
Page 5–43
Controls: Service and Repairs