Transmission Belt Installation (continued)
Belts: Service and Repairs
g302331
3. Install the belt on the transmission pulley.
4. Using a 7/16 inch nut on the bottom of the transmission, release pressure on
the quarter inch screw driver. Remove the quarter inch screw driver, allowing
idler arm to put tension on the belt.
5. Install the 4 (1/4–20 inch) taptite screws securing the belt cover to the frame.
Torque bolts to 55 ± 5 in-lbs. (6 ± 1 Nm).
g296175
6. Install the 1/4–20 inch taptite screw securing the frame access cover to the
frame. Torque bolt to 110 ± 11 in-lbs. (12 ± 2 Nm).
Figure 157
Figure 158
Page 6–16
30 Inch TurfMaster® HDX WPM
3432-730 Rev A