Engine Installation (continued)
Engine: Service and Repairs
Note: To install the front bolt, go through the access hole in the deck with a
10 inch (3/8 inch) drive extension and a ½ inch socket with a universal joint.
3. Install the BBC belt through the rear of the mower.
4. Install the BBC belt to the engine pulley.
5. Install the BBC belt to the brake pulley.
g296181
6. Move the brake arm upwards to align with the pulley.
g302385
7. Tighten the 1/2 inch nylock nut from the BBC idler arm pivot until flush with
the bottom bolt. Secure the topside of the bolt with a 1/2 inch wrench.
Note: Access through the front side of the frame.
Figure 15
Figure 16
Page 4–10
30 Inch TurfMaster® HDX WPM
3432-730 Rev A