Toro TurfMaster HDX 22215 Service Manual page 53

BBC Cable Installation (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g305213
2. Loosely install the 1/4–20 inch screw securing the cable to the main frame.
3. Install the cable. Install the 1/4–20 inch shoulder bolt and nut securing the
cable to the BBC bail. Torque bolt and nut to 75 ± 5 in-lbs. (8 ± 1 Nm).
g302395
4. Tighten the 1/4–20 inch nylock nut to carriage bolt securing the cable guide
clamp to the handle. Adjust the housing cable so there is no slack in the
cable. Torque nut to carriage bolt to 40 ± 7 in-lbs. (4 ± 1 Nm).
Figure 44
Figure 45
Page 5–9 Controls: Service and Repairs