Curved Handle Replacement (Non-Electric Start Models Only) - Toro 21462 Service Manual

AWD PERSONAL PACE® Handle Assembly Installation (continued)
AWD PERSONAL PACE® Handle Assembly Test
Curved Handle Replacement (Non—Electric Start Models Only)
Curved Handle Removal (Non—Electric Start Models Only)
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
g352638
14. Install the brake cable into the cable anchor.
15. Install the recoil rope onto the rope guide.
1. Verify the traction control rod returns to a neutral position smoothly. If
excessive force is observed, inspect the torsion spring for the correct amount
of wrap.
Note: The spring has half of the rotation wrap when fully assembled.
1. Park the machine on a level surface, stop the engine and wait for all moving
parts to stop.
2. Remove the grass bagger assembly if attached.
3. RWD models only, remove the RWD PERSONAL PACE® handle.
PERSONAL PACE® Assembly Handle Removal (page 5–20)
4. AWD models only, remove the AWD PERSONAL PACE® handle.
PERSONAL PACE® Handle Assembly Removal (page 5–31)
5. Remove the lock nut securing the rope guide to the curved handle.
Figure 76
Page 5–37
RWD
AWD
Controls: Service and Repairs