Engine Installation (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g305213
8. Install the belt guide. Install the 2 (1/4–20 inch) taptite screws securing the
front BBC belt guide to the bosses on the frame. Torque screws to 110 ± 11
in-lbs. (12 ± 2 Nm).
g296179
9. Install the transmission belt through the rear of the mower.
10. Install the transmission belt to the engine pulley.
Note: Access belt engine pulley from the front of the mower.
Figure 17
Figure 18
Page 4–11
Engine: Service and Repairs