Transmission Removal (continued)
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g297057
15. Remove the 5/16–18 inch nut on carriage bolt securing the spring bracket
to the frame.
g297058
16. Using snap ring pillars, remove the snap ring retaining the pinion gear from
axle shaft.
Note: Inspect the pinion gear to wheel gear mesh for abnormal wear, broken
teeth, and uneven wear. Replace pinion gear to wheel gear mesh if needed.
Figure 370
Figure 371
Page 8–9
Drive System: Service and Repairs