Advertisement
Tape Piayback
To Locate the Beginning of a Selection
—Automatic
Music Sensor (AMS)
Direction indicator
To locate the beginning of the | To locate the beginning of the
selection being played
next selection
Depress <4
Depress he
t
zie
Depress p>»
Depress «<4
The desired selection cannot be located it...
~—there is noise in the space between
selections
—the
space
is tess
than
4 seconds
long.
—the BP or <q button is pressed immediately
before the beginning of the desired selection
or after the beginning of tha desired
selection,
or within
the biank
space
Playback or fast winding may begin in the middle
of the selection when AMS or blank skip is
activated, as the followings are treated as blanks:
—a long pause in the selection
—a passage of low frequencies or very low
volume.
—gradual increase or decrease of volume, as in
some classical music
Automatic Tuning
VOLUME 2
O
Turn clockwise to tum the power
on.
Press to select the desired band,
FM (1 or 2) or AM.
Each time the button is pressed, the
corresponding indicator appears in the
display window.
Press PUSH SEEK.
Stations will be scanned automatically and
scanning will stop when a station is tuned in
Repeat pressing the PUSH SEEK until the
desired station is tuned in.
Adjust the volume.
When an FM stereo program of sufficient
signal strength is tuned in
Zz
The ST
a
| r
ul aa
indicator
{ Lf
t,t
appears.
To play back the during radio reception
Insert a cassette. The radio is turned off
and
playback
will begin
automatically.
For Improved reception
* To receive a weak FM
* To receive
very
strong
stereo program, press
MONO. The FM stereo
program ts received in
ao
monaural, but the
in thls case. the ST indicator
noise will be reduced
disappears.
FM/AM station or to
receive an AM station
at night, press
MTL/LCL
Advertisement
