Radio; Searching For Stations Automatically - Automatic Tuning; Tuning In By Adjusting The Frequency; Manual Tuning - Sony XR-1780 Operating Instruction

Radio

Searching for stations
automatically
— Automatic tuning
1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n MWn SW1
n SW2 n FM1
2
Press either side of the SEEK/MANU
button to search for the next station
(automatic tuning).
SEEK
MANU
For lower
frequencies
Scanning stops when a station is received.
Press either side of the button repeatedly until
the desired station is received.
When an FM stereo programme with sufficient
signal strength is tuned in, the "ST" indication will
appear.
ST
If the automatic tuning stops too frequently, press
the LCL button so that the "LCL" indication
appears in the display window (local seek mode).
Only the stations with relatively strong signals will
be tuned in. The local seek mode functions only
when the automatic tuning is in operation.
SEEK
MANU
For higher
frequencies
Tuning in by adjusting the
frequency

— Manual tuning

1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n MWn SW1
n SW2 n FM1
2
Press and hold either side of the SEEK/
MANU button.
Release the button when the desired station
is received.
SEEK
MANU
For lower
frequencies
PREVENT ACCIDENTS!
While driving, use automatic tuning and
memory preset tuning instead of manual
tuning.
Memorizing stations
automatically

— Automatic memory function

Stations with the clearest reception are
automatically searched and memorized on
each band (FM1, FM2, MW, SW1, and SW2).
Up to 6 stations on each band can be stored on
the preset number buttons 1 to 6 in the order of
band frequency.
1
Select the desired band.
A MEM
TUNER
FM1 n FM2 n MWn SW1
n SW2 n FM1
2
Press the TUNER/A MEM button for more
than two seconds.
A MEM
TUNER
The unit will start scanning the selected
band and automatically memorize the
tuned stations on the preset number
buttons 1 through 6.
SEEK
MANU
For higher
frequencies
GB
7