Tuning In A Station; Searching For The Stations Automatically; Automatic Tuning; Tuning In By Adjusting The Frequency - Manual Tuning - Sony XR-1853MK2 Operating Instructions Manual

Tuning in a Station

Searching for the Stations
Automatically

— Automatic Tuning

1
Turn on the unit by rotating the VOL
control.
VOL
FAD
2
Select the desired band.
FM
FM1 n FM2 n MW
MW
LW
n LW n FM1
3
Press either side of the SEEK button
to search for the station (automatic
tuning).
SEEK
For lower
frequencies
The scanning stops when a station is
received. Press either side of the button
repeatedly until the desired station is
received.
When an FM stereo program with a sufficient
signal strength is tuned in,
FM 12 3
ST
the "ST" indication will appear.
Actual total number:
Tuning in by Adjusting the
Frequency
1
Select the desired band.
FM
MW
LW
2
Press and hold either side of the
button.
Release the button when the desired station
is received.
For lower
frequencies
PREVENTING ACCIDENTS!
When tuning in during driving, use the
automatic tuning or the preset number buttons
instead of the manual tuning.
SEEK
Scanning for the Stations
For higher

— Scan Function

frequencies
1
Select the desired band.
FM
MW
LW
2
Press the SCAN button.
SCAN
The stations with the strongest signals will be
scanned for five seconds each in order. Press
the button again when the desired station is
received.
Sony XR-1853MK2 (E, Po, Bu, Hu, R) 3-856-560-11 (1)
— Manual Tuning
For higher
frequencies
EN
5