Do you have a question about the A1 with AMS lite and is the answer not in the manual?
Questions and answers
debra ruffner
January 31, 2025
the y axis plate will not slide off, the end of the plate will not disengage from the magnet
1 comments:
Mr. Anderson
May 14, 2025
To fix the issue where the Y-axis plate won’t slide off the Bambu Lab A1 with AMS Lite due to the magnet holding it in place, follow these detailed steps based on the manual:
1. Push the heatbed fully to the front end – This is the side where the screen is located. Doing this clears the space needed to access the Y-axis cover.
2. Open the Y-axis cover – Carefully lift or open the cover. If it feels stuck due to the magnet, apply gentle but steady pressure. The magnet is designed to hold the plate firmly, so you may need to slightly wiggle the cover while pulling.
3. Gently pull out the Y-axis cover – Don’t use excessive force. The magnet may create some resistance, but once the alignment is off-center, it should release more easily.
4. Tip: If the magnet is especially strong or stuck, try tilting the cover slightly upward as you pull. This can help break the magnetic hold without damaging the components.
5. Once removed, you can continue with the rest of the maintenance steps, like locking the base housing or reinstalling the cover by reversing the steps.
Would you like a visual reference from the manual to help guide the process?
This answer is automatically generated
Jan Smit
February 9, 2025
How to get models
1 comments:
Mr. Anderson
February 11, 2025
You can obtain models for the Bambu Lab A1 with AMS Lite by accessing preloaded models on the SD card. Press “Print Files” on the printer, then select the model you want to print. Additionally, you can use third-party slicers that export standard G-code, such as Superslicer, Prusaslicer, and Cura, though some advanced features may not be supported.
Need help?
Do you have a question about the A1 with AMS lite and is the answer not in the manual?
Questions and answers
the y axis plate will not slide off, the end of the plate will not disengage from the magnet
To fix the issue where the Y-axis plate won’t slide off the Bambu Lab A1 with AMS Lite due to the magnet holding it in place, follow these detailed steps based on the manual:
1. Push the heatbed fully to the front end – This is the side where the screen is located. Doing this clears the space needed to access the Y-axis cover.
2. Open the Y-axis cover – Carefully lift or open the cover. If it feels stuck due to the magnet, apply gentle but steady pressure. The magnet is designed to hold the plate firmly, so you may need to slightly wiggle the cover while pulling.
3. Gently pull out the Y-axis cover – Don’t use excessive force. The magnet may create some resistance, but once the alignment is off-center, it should release more easily.
4. Tip: If the magnet is especially strong or stuck, try tilting the cover slightly upward as you pull. This can help break the magnetic hold without damaging the components.
5. Once removed, you can continue with the rest of the maintenance steps, like locking the base housing or reinstalling the cover by reversing the steps.
Would you like a visual reference from the manual to help guide the process?
This answer is automatically generated
How to get models
You can obtain models for the Bambu Lab A1 with AMS Lite by accessing preloaded models on the SD card. Press “Print Files” on the printer, then select the model you want to print. Additionally, you can use third-party slicers that export standard G-code, such as Superslicer, Prusaslicer, and Cura, though some advanced features may not be supported.
This answer is automatically generated