Related Manuals for Bambu Lab P1S
Summary of Contents for Bambu Lab P1S
- Page 1 3D Printer Quick Start Please review the entire guide before operating the printer. Safety Notice: Do not connect to power until assembly is complete.
-
Page 3: Component Introduction
Component Introduction Air Filter Tool Head SD Card Pause Screen Back Chamber Camera Belt Tensioner Bambu Bus Build Plate Cooling Fan Excess Chute Power Socket... - Page 4 Screen Spool Holder Filament Spare Hot End Nozzle Wiping Power Cord Unclogging Pin Tool PTFE Tube Bambu Scraper Allen Key H1.5 Allen Key H2 Build Plate （ Pre-installed）...
- Page 5 Tool Head Unlock...
- Page 6 Spool Holder Assembly Remove the screws as pictured with an Allen Secure the spool holder with two screws from Key H2. Attention:...
- Page 7 Hot Bed Unlock & Screen Installation Remove the three screws with an Allen Key H2 to unlock the hot bed. into the terminal as pictured. Attention: Bend the LCD cable towards the Inset the screen back to the slot on the printer, opening on the back of the screen as pictured.
- Page 8 QR Code 3. Use Bambu Handy to scan the QR code on the screen, and bind your printer with your Bambu Lab account. 4. Follow the instructions on the screen to complete the initial calibration.
-
Page 9: First Print
First Print Select " "-" ", and heat the nozzle to the Select " "-" "-" " several times until the print. pulled out from the PTFE tube anchor manually. - Page 10 Bambu Studio Download Bambu Studio: https://bambulab.com/en/download/studio Log in to Bambu Studio with your Bambu Lab account, which is the same for the Bambu Online store. Create or open a project.
- Page 11 Bambu Studio PLA Plate Slice the model, select your printer and send the model to print.
- Page 12 Bambu Studio During printing, you can remotely monitor your print, or pause/stop printing on the...
- Page 13 Item Printing Technology Fused Deposition Modeling Build Volume(W*D*H) 256*256*256 mm³ Chassis Steel Body Shell Plastic & Glass Hot End All-Metal Extruder Gears Steel Nozzle Stainless Steel Max Hot End Temperature Toolhead Nozzle Diameter (Included) 0.4 mm Nozzle Diameter (Optional) 0.2 mm, 0.6 mm, 0.8 mm Filament Cutter Filament Diameter 1.75 mm...
- Page 14 Dimensions(W×D×H) 389*389*458mm³ Physical Dimensions Net Weight 12.95kg 100-240 VAC, 50/60 Hz Input Voltage 1000W@220V, 350W@110V Electrical Requirements Max Power USB Output Power 5V/1.5A Display 2.7-inch 192x64 Screen Connectivity Wi-Fi, Bluetooth, Bambu-Bus Electronics Storage Micro SD Card Button, APP, PC Application Control Int Motion Controller Bambu Studio...
- Page 15 Please visit the Bambu Lab Wiki for more setup and maintenance tutorials. https://wiki.bambulab.com/en/home Bambulab Wiki Approach 1: Approach 2:...
- Page 16 Enjoy! www.bambulab.com...