Table of Contents
Advertisement
11.2 Setting up NI-VISA application
NI-VISA is used to communicate with the PXIe chassis or installed modules / instruments. The above steps must be completed before attempting to
communicate using NI-VISA.
1. Launch NI-MAX. In the left-hand side menu, select an instrument from the Network Devices list.
2. On the right-hand side panel, select Open VISA Test Panel. A new window will popup. Click the Input / Output button from the window menu.
Valid chassis and module commands can be entered in, and their returns queried
51 / 61
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
Advertisement
Table of Contents
