Uninstall The Module From A Pxie Chassis - Quantifi Photonics SLED 1000 Series User Manual

5.2 Uninstall the module from a PXIe chassis
WARNING
When attempting to install or remove a module or any component of the PXIe chassis:
Power the chassis OFF.
Follow these installation instructions.
1
Power the chassis OFF.
4
Store the module in its antistatic bag.
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
2
Unsecure the fastening screws and
fastening clip.
5
Power ON the chassis.
3
Pull out the module.
Use the fastening clip to pull. Do NOT pull
on the connectors.
15 / 61