Install The Module In A Pxie Chassis - Quantifi Photonics SLED 1000 Series User Manual

5.1 Install the module in a PXIe chassis
WARNING
When attempting to install or remove a module or any component of the PXIe chassis:
Power the chassis OFF.
Follow these installation instructions.
After powering the PXIe chassis ON, please wait at least 2 minutes before attempting to communicate with the module. This gives the
chassis time to boot and initialize the communication server.
1
Power the chassis OFF.
4
Push module into slot until you feel
resistance from the backplane connection.
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
2
Remove the module from the anti-static
bag. Retain the bag.
5
Engage the fastening clip. Secure all
fastening screws.
3
Align the module with the slot guide rails.
6
Power the chassis ON.
14 / 61