Pxie Multi Chassis Mode Operation; Ni-Max Application Multi Chassis Mode - Quantifi Photonics SLED 1000 Series User Manual

9.5 PXIe Multi Chassis mode operation
Multiple chassis can be connected to operate in Multi Chassis Mode.
To operate in Multi Chassis Mode, CohesionSCPI service must be version 1.02.06 or later.
9.5.1 NI-MAX application Multi Chassis mode
NOTE
The CohesionSCPI service does not manage the chassis numbers. These are controlled by the NI Platform Services (and through NI-MAX).
Even if the CohesionSCPI service is in Multi Chassis mode, if a chassis is connected but has no installed modules, it will not show up when *OPT? is
run.
In the example shown below, there are two chassis connected via the PXIe-8384 to PXIe-8381 connection. Chassis #2 has the controller running
CohesionSCPI service, and Chassis #3 is the 'extended' chassis.
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
39 / 61