Slot Commands - Quantifi Photonics SLED 1000 Series User Manual

9.7.2 Slot commands
Command :SLOT<slot>:OPC?
Syntax
:SLOT<slot>:OPC?
Description Query the Operation Complete Status of the module
Parameters N/A
Response 1: the module is ready to accept a new command
0: the module is busy performing a previous operation
NOTE: Any commands sent to the module when :MODUle<slot>:OPC? is NOT 1, may not execute or return an
error.
Syntax
:SLOT1:OPC?
-> 1
Command :SLOT<slot>:OPTions?
Syntax
:SLOT<slot>:OPTions?
Description Query the modules managed by the CohesionSCPI service
Parameters N/A
Response A comma separated array, or a single integer value based on the arguments given
Example :SLOT3:OPTions?
-> 1,,,,,,,
Command :SLOT<slot>:IDN?
Syntax :SLOT<slot>:IDN?
Description Query the slot identification
Parameters N/A
Response A comma-separated string containing "<manufacturer>,<model name>,<serial number>,<hardware
version><firmware version>".
Note that the hardware and firmware versions are not comma separated.
Example
:SLOT3:IDN? ->
Quantifi Photonics Ltd,SLED-1011-2-FA-PXIE,QP-192001,HW1.0FW1.00
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
Summary >>
>>
Summary >>
>>
Summary >>
>>
45 / 61