Setting Up Ni-Max Application - Quantifi Photonics SLED 1000 Series User Manual

11.1 Setting up NI-MAX application
To communicate with any Quantifi Photonicsproduct, the chassis / benchtop product must first be setup as a TCP/IP instrument.
1. After installing NI-MAX, launch the application. In the left side panel of the window, click the Devices and Interfaces option. A drop down of
available instruments detected will show up.
2. Click on Network Devices, then click Add Network Devices and select VISA TCP/IP Resource.
3. Select Manual Entry of LAN Instrument. Enter in the Hostname or IP Address.
Note when operating locally, enter in the localhost IP address of 127.0.0.1. Click Finish to end the setup process.
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
50 / 61