Setting Up Hardware - Quantifi Photonics SLED 1000 Series User Manual

5 Setting up hardware
Quantifi Photonics modules are designed for easy installation in a PXIe-compatible chassis.
Ensure that the chassis being used supports PXIe (or contains PXI-hybrid compatible slots). If you are unsure if your chassis is compatible with your
Quantifi Photonics product, please contact Quantifi Photonics Customer Support.
Make sure to follow these instructions when installing or removing a Quantifi Photonics module from a PXIe chassis.
CAUTION
The product is sensitive to electrostatic discharge (ESD). To prevent damage from ESD:
Do not remove the product from the antistatic packaging until instructed to do so.
Wear a grounded wrist strap at all times when handling the product.
CAUTION
Skin contact may leave corrosive residue and damage a connector:
Do not touch the optical connectors.
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
13 / 61