Table Of Contents; Introduction; Charging The Microaeth - Aethlabs microAeth MA Series Quick Start Manual

Table of Contents

Introduction
Charging the microAeth
Important information Before Getting Started
Installation & Environmental Considerations
Recommendations and Best Use Practices
MA200 Included Items
MA300 Included Items
MA350 Included Items
Operation
Turn On:
Turn Off:
On-board Status Indications:
Menu Options:
During Startup:
During Sampling:
Operating Parameters:
Filter Tape Cartridge Removal and Installation
To remove filter tape cartridge:
To install filter tape cartridge:
Performing Measurements
To Start Sampling and Measrements:
To Stop Sampling and Measrements:
USB Communication, Configuration, & Data Export
To connect and configure the microAeth using the microAeth Manager application:
To download data to the microAeth Manager local database:
To export downloaded data from microAeth Manager to data files on computer:
To delete all data on the microAeth:
Calibration
Cleaning & Maintenance
Status Codes
MA Series MA200, MA300, MA350 Quick Start Guide
microAeth
®
2

Introduction

3
Thank you for your purchase of an AethLabs microAeth® MA Series Black Carbon
3
monitor. This guide is a short introduction to setting up and using your microAeth
4
instrument. Please refer to the
5
7
Carefully unpack the instrument and accessories from their packaging. Check to identify
8
that all items are present and that there is no damage. Retain original packaging for safe
10
storage and shipping of the instrument.
12
14
The small size and light weight of the microAeth MA series instruments will allow you
to gather data in a wide range of mobile or stationary applications. The MA series filter
cartridge enables unattended operation from multiple weeks to a year, depending on
the model, settings, and environmental factors. Optimization of performance across this
breadth of applications requires an understanding of operational settings, precautions, and
maintenance procedures. The following recommendations provide general guidelines.
17

Charging the microAeth

Before using the instrument, the internal battery can be charged by plugging it in to
20
external power using the barrel jack power adapter. Battery runtime varies with settings
and age of the pump and battery.
21
The on-board screen displays a lightning bolt to the left of the battery indicator in the top
right corner, when the instrument is turned on, connected to an external power source
using the 5V barrel jack port.
24
25
25
Charging times with instrument turned off:
MA200: DC via barrel jack AC adapter: ~3 hours
MA300: DC via barrel jack AC adapter: ~11.75 hours
MA350: Sealed connector DC via barrel jack AC adapter: ~11.75 hours
MA Series MA200, MA300, MA350 Quick Start Guide
AethLabs microAeth
®
MA Series Manual for more detailed information.
lightning bolt
charging symbol
AethLabs
3