Figure 3-3 Stabilizer Plate (Part Of Converter Service Toolbox); Figure 3-4 Semiconductor Test Device Fadec 3 - ABB PCS6000 Service Manual

The stabilizer plate (see Fig. 3–3) is used to stabilize the stacks containing semiconductors
during replacement. See section 10.7.2, Releasing the stacks, page 179.
Figure 3–3 Stabilizer plate (part of converter service toolbox)
The FADEC 3 is a test device to find defective semiconductor in the stack. See chapter 9,
Checking diodes, IGCTs and IPS, page 115 and the "PCS6000 user manual",
3BHS600000 E40.
Figure 3–4 Semiconductor test device FADEC 3
PRODUCT
PCS6000
DOCUMENT KIND
Service manual
DOCUMENT ID.
3BHS600000 E80
SERVICE TOOLS
REV. LANG. PAGE
F en 34/272