ABB PCS6000 Service Manual page 212

5. Remove the LV and system cable on the left side of the GDM2 as well as the aluminum
plate.
6. Remove the mounting screws of GDM2 and pull the GDM2 to the front of the cabinet.
7. Lift the GDM2 down as described in section 10.9.1, Replacing grid/generator
disconnector module (GDM1) at the front of the VFU, page 203.
8. Replace the GDM2.
9. Rebuild the VFU in reverse order.
10. Restart the PCS6000 according to section 5.4, Start-up after maintenance or
troubleshooting, page 70.
PRODUCT
PCS6000
DOCUMENT KIND
Service manual
REPLACING POWER AND COOLING COMPONENTS
1
DOCUMENT ID.
3BHS600000 E80
REV. LANG. PAGE
F en 212/272