Operation; Selecting Heating Modes - Bessey SBH Series User Manual

9. Operation

There are 4 heating methods:
Temperature mode
• For controlled heating up to the desired
temperature and if you want to make
use of the thermostat feature. This
feature maintains the heated workpiece
at the pre-set temperature for a
maximum period of 5 minutes.
With the temperature or time mode
• For controlled heating up to the desired
temperature or duration. Depending
on which of these is reached or elapsed
first, the heater switches off.
9�1 Selecting heating modes
The various heating modes can be selected by tapping the current mode on the settings screen.
© Bessey Tools
Time mode
• Suitable for series production. If the time
needed to reach a certain temperature is
known, the workpiece can be heated in
series with the time mode.
• In the event of an emergency. If the
sensor is faulty, as a contingency
measure, the workpiece can be heated
with the time mode. The temperature
may be measured with an external
thermometer.
With the temperature & speed mode
• In the case of controlled heating to
the desired temperature, whereby
a maximum temperature gradient
per time unit can be entered so the
workpiece is heated according to a
certain curve.
EN
FR
25