Bessey SBH Series User Manual page 29

• If necessary, change the temperature set by pressing the current temperature.
• If desired, switch on the "hold temp�" (thermostat mode) and log functionality by moving
the sliders to the right. These will now turn green.
• Press "START". The heating starts, you will hear a slight humming sound.
• The display shows the current temperature of the workpiece.
• If a second sensor is attached to the workpiece, this temperature also appears on the display.
By pressing the info button
again displays additional information from the process.
• Unless the thermostat function is switched on, heating will stop automatically when the
set temperature is reached. A loud beep sounds, and the display shows information about
how the heating process went. The beep can be ended by pressing "STOP".
• When the thermostat function is switched on, unless you press "STOP", the workpiece will
be kept at the set temperature for the time set. Heating starts again after the temperature
has dropped to the temperature set in the system settings to which the workpiece is
allowed to drop. Each time the set temperature is reached, the induction heater sounds a
loud beep.
• During this cycle, a clock is displayed at the bottom of the screen with the time remaining
for the temperature hold mode. After the temperature hold time has elapsed, the heater
sounds a continued loud beep, which can be ended by pressing "STOP".
• Each time the induction heater stops, it automatically demagnetises the workpiece.
• The heating process or thermostat feature can be interrupted by pressing "STOP".
© Bessey Tools
, the heating process is displayed graphically. Pressing info
EN
FR
29