Explanation Of System Settings - Screen 2; Explanation Of System Settings - Screen 3 - Bessey SBH Series User Manual

Default max speed:
6.3 Explanation of system settings – screen 2
Default
Temperature hold:
6.4 Explanation of system settings – screen 3
Offset Temperature
probe 1:
Offset Temperature
probe 2:
Unit:
Language:
18
Maximum setpoint, maximum heating speed in the temp&speed
modes. This does not mean that the heater will always reach this
speed. This depends, among other things, on the geometry of the
workpiece, the crossbar used, etc.
Default temperature hold on or off
Calibration / correction readout thermocouple 1
Calibration / correction readout thermocouple 2
Setting of the temperature measurement in °C or °F.
Setting of the language in which the texts on the screen are displayed.
Choice of Dutch, English, German and Italian.
© Bessey Tools