General repair instructions
Remove loose parts (e.g. paint scales that may
l
have come off during assembly work) with an indus-
trial vacuum cleaner or any means of extraction.
Working means and tools must be cleaned before
l
being used for work. Use only tools without dam-
aged chromium coating, or tools without chromium
coating.
008 916 89
Fuel hoses
Fig. 2
Caution
!
All fuel hoses have two layers of material, a rein-
forced rubber coating outside and an internal Vi-
ton hose. If a fuel hose has come loose one must
make absolutely sure that the internal Viton layer
has not been separated from the reinforced outer
layer. In case of a separation the hose needs to be
replaced.
BOMAG
1.3
23