Fayat Group BOMAG BW 191/206 AD-5 Service Manual page 32

General – Concerning your safety
1.2.11.4 Exhaust gas aftertreatment system, regeneration at standstill
1.2.11.5 Maintenance work on electric components and battery
1.2.11.6 Working on the air conditioning
1.2.11.7 Cleaning work
32
During regeneration at standstill the exhaust gas reaches very high
temperatures and the exhaust gas quantity increases - fire hazard!
When performing regeneration at standstill park the machine out-
doors at a safe distance from any combustible or explosive mate-
rials.
Components of the exhaust gas aftertreatment system get very
hot.
Do not touch hot components or exhaust gases.
Should there be an endangerment caused by high exhaust gas
temperatures and quantities, the operator needs to suppress the
regeneration at standstill.
Before starting to work on electric parts of the machine disconnect
the battery and cover it with insulating material.
Do not use fuses with higher ampere ratings and do not bridge
fuses.
When working on the battery, smoking or open fire is prohibited!
Do not lay any tools or other metal objects on the battery.
Do not wear jewellery (watch, bracelets, etc.) when working on the
battery.
The connection cables of the battery must not touch or rub against
machine parts.
Faults on the air conditioning should only be remedied by author-
ized service personnel.
Do not perform welding work in the vicinity of the air conditioning.
Danger of explosion!
Do not clean the condenser in the air conditioning system with a
hot water jet. Danger of explosion!
Do not release refrigerant into the atmosphere, but dispose of it in
an environmentally friendly way.
Do not perform cleaning work while the motor is running.
Allow the engine to cool down before starting cleaning work on
engine and exhaust system.
Never use gasoline or other easily inflammable substances for
cleaning.
BW 191/206 AD-5 / BW 191/206 ADO-5