Handling Fuels And Lubricants - Fayat Group BOMAG BW 191/206 AD-5 Service Manual

1.2.4 Handling fuels and lubricants

1.2.4.1 Preliminary remarks
The ROPS must not show any rust, damage, hairline cracks or
open fractures.
The real machine weight must never exceed the testing weight for
the ROPS.
No accessories may be welded or bolted on and no additional
holes must be drilled without the consent of the manufacturer,
since this will impair the strength of the unit.
The ROPS must therefore also not be straightened or repaired if it
is damaged.
A defect ROPS must generally be replaced with an original spare
part in close coordination with the manufacturer.
The operating company must ensure that all professional users
have read and follow the corresponding safety data sheets for the
individual fuels and lubricants.
Safety data sheets provide valuable information about the following
characteristics:
n
name of substance
n
possible dangers
n
composition / information on constituents
n
first-aid measures
n
fire fighting measures
n
measures in case of accidental release
n
handling and storage
n
limitation and monitoring of exposure / personal protective
equipment
n
physical and chemical properties
n
stability and reactivity
n
toxicological data
n
environmental data
n
notes on waste disposal
n
information on transport
n
legislation
n
other data
BW 191/206 AD-5 / BW 191/206 ADO-5
General – Concerning your safety
19