Fayat Group BOMAG BW 191/206 AD-5 Service Manual page 28

Tandem vibratory roller
Table of Contents

Advertisement

General – Concerning your safety
1.2.7.3
Driving on gradients and slopes
1.2.7.4
Parking the machine
28
Keep the cabin doors closed.
Do not adjust the driver's seat while driving.
Do not climb onto or off the machine while the machine is driving.
Do not use the machine to transport persons.
In case of unusual noises and development of smoke perform
trouble shooting to determine the cause and have the fault cor-
rected.
Match the speed to the working conditions.
Do not make extreme steering movements when driving with high
speed, danger of tipping over!
Always give way to loaded transport vehicles.
Switch the lights on if the visibility is poor.
Always keep a safe distance to excavation pit borders, embank-
ments and edges.
Refrain from any work that could adversely affect the stability of the
machine.
Always keep a sufficient distance when passing through subways,
under bridges, tunnels, electric power lines etc.
Do not drive on gradients exceeding the maximum gradability of
Ä Chapter 3 „Technical data" on page 81.
the machine
Drive extremely carefully on gradients and always directly up or
down the slope.
Soil conditions and weather influences impair the gradability of the
machine.
Wet and loose soils considerably reduce ground adhesion of the
machine on gradients and slopes. Higher risk of accident!
Park the machine on horizontal, level, firm ground.
Before leaving the machine:
n
shift all control levers to "Neutral position", "Off" or "0",
n
apply the parking brake,
n
shut down the engine, pull off the ignition key,
n
pull off the main battery switch,
n
secure the machine against unauthorized use.
Do not jump off the machine, but use hand grips and access steps.
Mark machines, which could be in the way, with a clearly visible
sign.
When parking on ascents or descents use appropriate means to
secure the machine against rolling.
BW 191/206 AD-5 / BW 191/206 ADO-5

Advertisement

Table of Contents
loading

Table of Contents