Leg Adjustment - identités 811184 Instruction Manual

Installing the armrest
For the installation of the armrest, see figure 6. Press the armrest onto the armrests on both sides and lock it with the screw nut.

Leg adjustment

4 support legs (can be replaced by 4 wheels with brakes) are set to the minimum height before delivery. Rotate the support legs (figure 8)
to change the height of the equipment, avoiding contact between the equipment and the toilet.
Attention :
Adjust the 4 legs to make the equipment stable, and make sure that the lid surface is in a horizontal position. At the same
time, make sure that the outermost lower edge of the seat of the equipment is higher than the upper edge of the ceramic base of the
toilet. Otherwise, the equipment may function abnormally.
Fixation with the toilet
1. Remove the toilet cover and the fixing screws, only the ceramic base of the toilet remains.
2. Lift the appliance (seat in the lowest state) and move it up the toilet base and lower it slowly to make sure that the seat of the
appliance does not touch the toilet base.
3. Check the position of the machine on the toilet, to avoid the machine colliding with the toilet during use.
4. For users with poor body balance, the crossbar of the main part A of the equipment should be fixed to the toilet with bolts (as
shown in Figure 10, Figure 11).
IDENTITES – Boulevard de la Chanterie – ZA Pôle 49 – 49124 Saint Barthelemy d'Anjou -  02.41.96.18.48
Figure 9: Confirm the height of the toilet seat