Download Print this page

F&F ASO-220 Quick Start Manual

Staircase timer

Advertisement

Quick Links

ASO-220
Staircase timer
Do not dispose of this device in the trash along with other waste! According to the
Law on Waste, electro coming from households free of charge and can give any amo-
unt to up to that end point of collec� on, as well as to store the occasion of the pur-
chase of new equipment (in accordance with the principle of old-for-new, regardless
of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
Staircase timer ASO-220 serves to keep switched-ON lighting of
staircase, corridor, or any other object for the set time and to
switch-OFF this lighting automatically, upon elapse of this set
time.
Functioning
Turned ON staircase timer supports the lighting during set time
by potentiometer (from 0.5 min. to 10 min.). After passage of set
time timer will switch OFF the lighting automatically.
After switching OFF the lighting there is possibility to switch it
ON again.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading

Summary of Contents for F&F ASO-220

  • Page 1 Electro thrown in the trash or abandoned in nature, pose a threat to the environment and human health. Purpose Staircase timer ASO-220 serves to keep switched-ON lighting of staircase, corridor, or any other object for the set time and to switch-OFF this lighting automatically, upon elapse of this set time.
  • Page 2 1. Disconnect the power supply. 2. Fix the device to the ground with two screws. 3. Connect to the circuit according to the diagram. 4. Set the operating time using a flathead screwdriver. Wiring diagram ASO-220 can work with backlit buttons. - 2 -...
  • Page 3 Technical data power supply 230 V AC maximum load current (AC-1) 10 A activation delay <1 s deactivation delay (adjustable) 0.5÷10 min. power consumption 0.56 W terminal OMY 3×0.75 mm², L= 0.45 m working temperature -25÷50°C dimensions 50×67×26 mm mounting surface protection level IP20...
  • Page 4 Warranty The F&F products are covered by a warranty of the 24 months from the date of purchase. Effective only with proof of purchase. Contact your dealer or directly with us. CE declaration F&F Filipowski sp. j. declares that the device is in conformity with the essential requirements of The Low Voltage Directive (LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC) Directive 2014/30/UE.