Download Print this page
F&F AS-212 Quick Start Manual

F&F AS-212 Quick Start Manual

Staircase timer

Advertisement

Quick Links

AS-212
Staircase timer
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
Staircase timer AS-212 serves to keep switched-ON lighting of
staircase, corridor, or any other object for the set time and to
switch-OFF this lighting automatically, upon elapse of this set
time.
Functioning
Turned ON staircase timer supports the lighting during set time
by potentiometer (from 0.5 min. to 10 min.). After passage of set
time timer will switch OFF the lighting automatically. After swi-
tching OFF the lighting there is possibility to switch it ON again.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading

Summary of Contents for F&F AS-212

  • Page 1 Electro thrown in the trash or abandoned in nature, pose a threat to the environment and human health. Purpose Staircase timer AS-212 serves to keep switched-ON lighting of staircase, corridor, or any other object for the set time and to switch-OFF this lighting automatically, upon elapse of this set time.
  • Page 2: Wiring Diagram

    Mounting 1. Take OFF the power. 2. Put on the relay on the rail in switchgear box. 3. Connect the relay to circuitry with wiring diagram. 4. By flat screwdriver set to switching threshold. Wiring diagram - 2 -...
  • Page 3 AS-212 can work with backlit buttons. - 3 -...
  • Page 4: Power Table

    Technical data power supply 230 V AC contact 1×NO maximum load current (AC-1) 16 A activation delay <1 s deactivation delay (adjustable) 0.5÷10 min. power consumption 1.2 W terminal 2.5 mm² screw terminals tightening torque 0.4 Nm working temperature -25÷50°C dimensions 1 module (18 mm) mounting on TH-35 rail...
  • Page 5: Warranty

    Warranty The F&F products are covered by a warranty of the 24 months from the date of purchase. Effective only with proof of purchase. Contact your dealer or directly with us. CE declaration F&F Filipowski sp. j. declares that the device is in conformity with the essential requirements of The Low Voltage Directive (LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC) Directive 2014/30/UE.