Download Print this page
F&F AS-221T Quick Start Manual

F&F AS-221T Quick Start Manual

Staircase lighting timer with switch-off indication

Advertisement

Quick Links

AS-221T
Staircase lighting timer
with switch-off indication
Do not dispose of this device in the trash along with other waste! According to the
Law on Waste, electro coming from households free of charge and can give any amo-
unt to up to that end point of collec� on, as well as to store the occasion of the pur-
chase of new equipment (in accordance with the principle of old-for-new, regardless
of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
Staircase lighting timer (time switch) is used to keep the lighting
on in corridors, staircases or other places for a certain period of
time, after which the lighting will be switched off automatically.
Functioning
When activated by momentary (bell) switch the staircase lighting
timer keeps the lighting switched on for the time set by the po-
tentiometer (from 0.5 to 10 minutes), after which the brightness
of the lighting system is reduced by half for about 30 seconds.
Only after this time will the lighting be completely switched off
(sudden darkness is avoided, there is time for safe access to the
switch). During the reduced brightness the subsequent signal
from the switch will switch the lighting back on to full brightness.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading

Summary of Contents for F&F AS-221T

  • Page 1 Konstantynowska 79/81, 95-200 Pabianice, POLAND phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl; e-mail: biuro@fif.com.pl AS-221T Staircase lighting timer with switch-off indication Do not dispose of this device in the trash along with other waste! According to the Law on Waste, electro coming from households free of charge and can give any amo- unt to up to that end point of collec�...
  • Page 2: Connection Diagram

    Mounting 1. Disconnect the power supply. 2. Mount the device on a rail in the distribution box. 3. Connect to the circuit according to the diagram. 4. Set the operating time using a flathead screwdriver. Connection diagram - 2 -...
  • Page 3 AS-221T can work with backlit buttons. The device does not work with lamps not adapted to phase control such as LED lamps, fluorescent lamps, compact fluorescent lamps or other lamps with electro- nic starter. - 3 -...
  • Page 4: Power Table

    Technical data power supply 195÷253 V AC contact 1×NO maximum load current (AC-1) 10 A activation delay <1 s deactivation delay (adjustable) 0.5÷10 min. lighting duration with reduced brightness 30 s power consumption 1,2 W terminal 2.5 mm² screw terminals tightening torque 0.4 Nm working temperature -25÷50°C...
  • Page 5: Warranty

    Warranty The F&F products are covered by a warranty of the 24 months from the date of purchase. Effective only with proof of purchase. Contact your dealer or directly with us. CE declaration F&F Filipowski sp. j. declares that the device is in conformity with the essential requirements of The Low Voltage Directive (LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC) Directive 2014/30/UE.

This manual is also suitable for:

5908312592136