Download Print this page
F&F AS-225 Manual

F&F AS-225 Manual

Staircase lighting timer, group

Advertisement

Quick Links

AS-225
Staircase lighting timer,
Do not dispose of this device in the trash along with other waste! According to the
Law on Waste, electro coming from households free of charge and can give any amo-
unt to up to that end point of collec� on, as well as to store the occasion of the pur-
chase of new equipment (in accordance with the principle of old-for-new, regardless
of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
The AS-225 staircase lighting timer is a controller dedicated to
the construction of a multi-point cascade stair lighting control
system, in which the effect of light moving along the stairs can
be achieved.
The number of controlled light points is arbitrary and requires
only a sufficient number of controllers to be connected with
each other.
Functioning
Short press of the DOWN button will turn on the lamp number
1. After the time TΔ set on the first controller, the lamp number
2 will start to light up gradually. After the actuation time T
the lamp number 1, it will start to slowly go out. The transition
from lamp 2 to lamp 3, from lamp 3 to lamp 4 and so on will be
carried out in the same way.
In case of a descending from the stairs (pressing the UP button),
the sequence will be reversed - first the lamp number 5 will light
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
group
- 1 -
of
ON

Advertisement

loading

Summary of Contents for F&F AS-225

  • Page 1 Electro thrown in the trash or abandoned in nature, pose a threat to the environment and human health. Purpose The AS-225 staircase lighting timer is a controller dedicated to the construction of a multi-point cascade stair lighting control system, in which the effect of light moving along the stairs can be achieved.
  • Page 2: Description Of The Device

    up, then number 4, and so on will light up first. If you press the button for a long time, the light will remain on while the button is pressed. Description of the device – lighting switch-on time (Ton) – lighting switch-on delay time (TΔ) –...
  • Page 3: Wiring Diagram

    Wiring diagram Contacts description Output to connect the lamp. For LEDs with marked polarity connect the "–" pin from the lamp to the LED terminal. Control input. It is designed to connect a button or other programming device (if this is the last contro- ller in the group) or to connect to the IN terminal in the next controller in the group.
  • Page 4 Mounting 1. Turn off the power. 2. Place the relay in the flush-mounted box. 3. Connect according to the scheme. 4. Set the operating time and switch-on delay using the standard screwdriver. Technical data input power supply 9÷30 V DC control inputs potential-free (IN, CEN, OUT)
  • Page 5 Example of group control - 5 -...
  • Page 6: Warranty

    Warranty The F&F products are covered by a warranty of the 24 months from the date of purchase. Effective only with proof of purchase. Contact your dealer or directly with us. CE declaration F&F Filipowski sp. j. declares that the device is in conformity with the essential requirements of The Low Voltage Directive (LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC) Directive 2014/30/UE.