Sony VCRplus+ DHR-1000 Operating Instructions Manual page 19

Hookup 3: VCR setup
1 Set the RF UNIT switch to CH 3 or CH 4, whichever
channel is not used in your area. If both are used,
set the switch to either channel.
If you made A/V connections (from page 12), you
can skip this step.
For details, see page 92.
2 Press EASY SET UP on the VCR.
The SET UP menu appears.
The CLOCK SET menu
appears. Select AUTO
and press EXECUTE.
For details, see page 27.
Use[e+]to select
Thef push [EXECUTE]
Push ((NITIAL SET] to quit
The CABLE BOX menu
appears. Set CABLE BOX
CONTROL to OFF and
press EXECUTE.
For details, see page 33. Usefes]to select
Then push [EX
Push [NITIAL SET] to quit
The TUNER PRESET menu SET UP TONER PRESET
"appears. Set ANTENNA/ ANTENNA LOABLE = < - ~
CABLE to ANT and press
EXECUTE.
For details, see page 30. Use[E]t0 select
Then push [EXECUTE}
Push [EASY SET UP) to quit
The AUTO PRESET starts. TONEn PararT
For details, see page 30. | AUTO PRESET
CABLE BOX CONTROL
(ON SEE
(CABLE
EXECUTING
Please wait
.
SET UP is done
Normal display «=
Hookup 3: VCR Plus+ channel setup
1 Find the VCR Plus+ Channel Listing in your
program guide. For details on the VCR Plus+
Channel Listing, see page 36.
2 Ifthe channels in the program guide are different
from the channels that you actually use on your TV,
set the channels that are different as follows:
Press MENU and select
SET VCR Plus+
CHANNELS.
Enter the program guide
channel, then the channel
~ you use on your TV.
SET VCR Plus+ CHANNELS
TIMER SET/ CHECK
TUNER PRESET
CLOCK SET
CABLE BOX CONTROL
CASSETTE MEMORY ERASE
Y/C DELAY
ADVANCED OPTIONS Or, push to see
Use [#4 to select VCR Plus+ CHANNEL LIST
GUIDE CH TV _CH
(25 = 15)
Push [0-9] keys to set
program GUIDE CH
Program guide channel
Your actual TV channel
4
For details, see page 37. Press EXECUTE.
Automatic clock setting
Once you've set up the VCR, it automatically sets the
clock the first time you turn off the VCR. After that,
whenever you turn off the VCR, it checks the time and
adjusts the clock, even for Daylight Saving Time.
The VCR sets the clock by picking up a time signal
that's provided by some TV channels.
If you want to use the timer to record right away, or if
the channels in your area do not carry time signals, set
the clock manually. For details, see pages 27-29.
Note
* To use the automatic clock setting feature, leave the cable box
on.
¢ Depending on your area, the automatic clock setting feature
may not set the clock correctly. In this case, set the clock
manually according to the procedure on page 29.
Getting Started 19