Sony VCRplus+ DHR-1000 Operating Instructions Manual page 37

Number
buttons,
ENTER
CH +/-
Press MENU, then press the
CURSOR (4/4) buttons to move
the cursor (8) to SET VCR Plus+
CHANNELS and press EXECUTE.
When using the EASY SET UP
procedure, skip this step.
TIMER SET/CHECK
TUNER PRESET
CLOCK SET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CASSETTE MEMORY ERASE
Y/C DELAY
ADVANCED OPTIONS
Use [44 to selact
Enter the guide channel number
assigned in the program guide
and press ENTER.
The TV CH column is highlighted.
¢ If you made Hookup 1, 2, or 3,
enter the actual number on
your TV (and VCR) and press
ENTER.
¢ If you made Hookup 4, enter
the cable output channel
(usually 2, 3, or 4) and press
ENTER.
¢ If you made Hookup 5, enter
the actual number on your TV
(and VCR) for an unscrambled
channel and press ENTER. For
a scrambled channel, enter the
cable box output channel
(usually 2, 3, or 4) and press
ENTER.
Repeat steps 3 and 4 for each
channel whose numbers don't
match.
When you have set all channels,
press EXECUTE to confirm your
channel settings.
When you've finished, press
MENU to exit.
SET VCR P!ius+ CHANNELS
GUIDE CH TV _CH
gx = 33)
Push [0-5] keys to set
program GUIDE CH
Then push (ENTER
SET VCR Plus+ CHANNELS
GUIDE CH TV CH
(337 = 8)
Push [0-3] keys to set
your TV CH
Or, push [EXECUTE] to see
VCR Plus+ CHANNEL LIST
SET VCR Plus+ CHANNELS
GUIDE CH
Push [0-3] keys to set
your TV CH
Or, push (EXECUTE) to see
VCR Plus+ CHANNEL LIST
C Plus+ CHANNEL LIST
o change page
Push [MENU to quit
Getting Started | 37