Sony VCRplus+ DHR-1000 Operating Instructions Manual page 15

Hookup 1: VCR setup
1 Set the RF UNIT switch to CH 3 or CH 4, whichever
channel is not used in your area. If both are used,
set the switch to either channel.
If you made A/V connections (from page 12), you
can skip this step.
RE UNIT
ons =i
A
ona
For details, see page 92.
2 Tumon your cable box.
3 Press EASY SET UP on the VCR.
The SET UP menu appears.
The CLOCK SET menu
appears. Select AUTO and
press EXECUTE. <
For details, see page 27.
Use(€>)to select
Then push
Push to quit
The CABLE BOX menu UP
appears. Set CABLE BOX GABEE. POM: CONTROL
CONTROL to ON and press
EXECUTE.
For details, see page 33. Useles]to select
Then push
Push {INITIAL to quit
Enter your cable box code rT US CABLE, BOX
number and press Your CABLE BOX Code No.
EXECUTE.
For details, see page 33.
Enter your CABLE BOX
Code No. using (0-3) keys
Refer to the Operating
Manuai for ihe Code
Then push [EXECUTE]
Select your cable box
output channel and press
~ EXECUTE.
For details, see page 33.
CABLE BOX
Your CABLE BOX Output CH
CH4 :
LINE(LINE IN 1 on VCR
Use 4 to setect CABLE
BOX CH. Then push
SEE UP
SET UP is done
Normal display =
Hookup 1: VCR Plus+ channel setup
1 Find the VCR Plus+ Channel Listing in your
program guide. For details on the VCR Plus+
Channel Listing, see page 36.
2 ifthe channels in the program guide are different
from the channels that you actually use on your TV,
set the channels that are different as follows:
Press MENU and select
SET VCR Plus+ CHANNELS.
Enter the program guide
channel, then the channel
you use on your TV.
2 ous~ CHANNELS
TIMER SET/CHECK
TUNER PRESET GUIDE CH TV_CH
CLOCK SET (25_ = 45)
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CASSETTE MEMORY ERASE
Y/C DELAY
ADVANCED OPTIONS Or, push (EXECUTE) to see
Use [#4 to select VCR Pius+ CHANNEL LIST
Push [0-3] keys to set
program GUIDE CH
Program guide channel
Your actual TV channel
§
For details, see page 37. Press EXECUTE.
Automatic clock setting
Once you've set up the VCR, it automatically sets the
clock the first time you turn off the VCR. After that,
whenever you turn off the VCR, it checks the time and
adjusts the clock, even for Daylight Saving Time.
The VCR sets the clock by picking up a time signal
that's provided by some TV channels.
If you want to use the timer to record right away, or if
the channels in your area do not carry time signals, set
the clock manually. For details, see pages 27-29.
Note
© To use the automatic clock setting feature, leave the cable box
on.
¢ Depending on your area, the automatic clock setting feature
may not set the clock correctly. In this case, set the clock
manually according to the procedure on page 29.
' Getting Started | 15