73 -Video Insert Editing - Sony VCRplus+ DHR-1000 Operating Instructions Manual

Editing with LANC cable
SSS SS rT
Video insert editing
Notes
¢ Do not change the counter
display during insert
editing. Editing may not
function accurately.
* Insert editing cannot be
made on a blank portion of
the tape. When a blank is
detected, the VCR stops
editing.
¢ If you record on the
beginning part of the tape,
or on the part just after the
unrecorded portion, the
first part of recording may
be dropped.
Before you start editing, set up the system according to the instructions
on pages 64 to 66.
> (PLAY)
@ (STOP)
PLAYER
RECORDER |
COUNTER
RESET
COUNTER
SELECT
Shuttle ring/
Jog dial
Edited tape
1 Press COUNTER SELECT so that the
tape counter appears.
2 Locate the end point (@) of the
scene to be recorded over.
1 Press RECORDER.
2 Press B> (PLAY), then locate the
recording end point with the jog dial
or shuttle ring.
3 Press COUNTER RESET.
(continued)
Editing | 73