Sony VCRplus+ DHR-1000 Operating Instructions Manual page 25

Press MENU and select Set MANUAL SET to ADD
channel is not used in your area. If both are used,
TUNER PRESET.
and press EXECUTE.
set the switch to either channel. —
If you made A/V
connections (from page 12), you
ANTENNA /CABLE[ANT — RSABEE}
can skip this step. pee eae us+ CHANNELS RAMU SET [ADO ERASE
CABLE BOX CONTROL AFT ON OFF
CASSETTE MEMORY ERASE FINE TUNING
Y/C DELAY
ADVANCED OPTIONS Select CH with [0-9] Push
Use [#4 to select [ENTER] (] to ADD/ ERASE
For details, see page 31.
Hookup 6: VCR Plus+ channel setup
1 Find the VCR Plus+ Channel Listing in your
program guide. For details on the VCR Plus+
Channel listing, see page 36.
For details, see page 92.
2 Set the A/B switch to "A."
3 Press EASY SET UP on the VCR. 2 For unscrambled channels, if the channels in the
The SET UP menu appears. program guide are different from the channels that
:
you actually use on your TV, set the channels that
are different as follows:
Press MENU and select Enter the program guide
SET VCR Plus+ channel, then the channel
CHANNELS. you use on your TV.
MENU
TIMER SET/CHECK
TUNER PRESET
CLOCK SET
SET VCR Pius+ CHANNELS
SET VCR Plus» CHANNELS
GUIDE _CH TV_CH
CABLE BOX CONTROL
CASSETTE MEMORY ERASE
Y/C DELAY
ADVANCED OPTIONS
Use [#4 to select
Push [0-9] keys to set
program GUIDE CH
The CLOCK SET menu CLOCK crt
appears. Select AUTO and
press EXECUTE. . AUROCIMANUAL]
For details, see page 27.
Or, push [E
XECU E to see
VCR Plus+ CHANNEL LIST
Program guide channel
Your actual TV channel
4
Usel[e}to select
Then push CUT!
Push (TNITIAL-SET] to quit
CONTROL to OFF and [ON TORE}
Puek Tecques output channel (usually 2, 3, or 4):
The TUNER PRESET menu TaNen paren
appears. Set ANTENNA/
CABLE to CABLE and press
EXECUTE.
For details, see page 30. to select
Then push [EXECUTE
Push [EASY SET UP] to quit
Press MENU and select Enter the program guide
SET VCR Plus+ ~ channel, then the cable
CHANNELS. 7 box output channel.
SET VCH Pluss CHANNELS
TIMER SET/ CHECK
TUNER PRESET GUIDE CH TV_CH
CLOCK SET =
CABLE BOX CONTROL Push [0-9] keys to set
CASSETTE MEMORY ERASE program GUIDE CH
Y/C DELAY
ADVANCED OPTIONS Or, push [EXECUTE] to see
Use #4 to select VCR Plus+ CHANNEL LIST
The AUTO PRESET starts. —
For details, see page 30.
AUTO. PRESET
EXECUTING
Program guide channel
Pr it
a Your cable box channel
4
For details, see page 37. Press EXECUTE.
Normal display SET UP is done
(continued)
Getting Started | 25