Searching Using The Index Function - Sony VCRplus+ DHR-1000 Operating Instructions Manual

Searching using the
index function
SEARCH
SELECT
<4 / DP
Note
¢ When searching in order of
the actual positions of the
recordings on the tape, an
index signal close to the
current position may not be
located.
The VCR marks the tape with an index signal at the point where each
recording begins. Using these signals as references, you can find a
specific recording. There are three kinds of search:
~ Searching the beginnings of recordings: Index search
— Searching a point on the tape where the recorded date changes: Date
search
~ Searching for scenes recorded in the photo mode with a digital
camcorder: Photo search
Searching in the list
If the tape has a cassette memory, the recordings are listed in the
chronologically in the order they were made. You can search using this
chronological list.
1 Press SEARCH SELECT to select TEER
the search type: INDEX, DATE, 28196 53 OOPM
or PHOTO SEARCH. .
The indicator of the search type you
selected lights.
The chronological list appears on the
monitor screen.
+
=|
Press k¢<4 or PPI to select a
recording.
The VCR starts searching and when it
locates the recording, begins
playback. During Photo search, the
VCR pauses.
INDEX SEARCH
Searching in the order of the actual positions of
the recordings on the tape
When you use a tape without a cassette memory, the VCR searches in
the order of the actual positions of the recordings, regardless of the
setting of CASSETTE MEMORY in the ADVANCED OPTIONS menu.
When you use a tape with a cassette memory, set CASSETTE MEMORY
in the ADVANCED OPTIONS menu to "OFF" (page 54).
1 Press SEARCH SELECT to select the search type.
The indicator of the search type you selected lights.
2 Press I or PPI repeatedly to
locate the recording you want. INDEX 3
The VCR starts searching backwards i
or forwards until the index number
comes to zero, then plays back the
recording. During Photo search, the
VCR pauses.
(continued)
Additional Operations | 49