Husqvarna DC 2-48 Operator's Manual page 12

a) Stop the motor for the rotating valves.
b) Stop the air compressor.
c) Disconnect the power plug from the power
supply.
To discard a full BigBag and install a
new BigBag bag
WARNING:
caution. Use lifting equipment. A full BigBag
can be heavy. Make sure that the straps are
closed correctly before you lift the BigBag.
WARNING:
protection when you replace the BigBag.
Personal protective equipment on
Refer to
page 6 .
12
Lift the BigBag with
Use approved respiratory
1. Stop the motor for the rotating valves.
2. Remove the funnels of the BigBag from the dust
outlets and close them.
3. Remove the pallet and the BigBag from the product.
4. Obey local regulations for disposal of the full BigBag
bag.
5. Put a new pallet and new BigBag below the product.
6. Install the funnels of the BigBag (A) on the dust
outlets (B).
B
C
A
7. Attach the funnels of the BigBag on the dust outlets
with straps (C).
8. Make sure that the BigBag sits evenly on the pallet.
2121 - 002 - 04.07.2023