4-18.
OPERATION WITH THE LINEAR AMPLIFIER
(1) Connection
Connect the cable supplied with the linear amplifier as shown below:
TL-922/922A
Coaxial cable
CAUTION:
Do not connect the power cable unless the
τι-922/922Α
POWER
switch is set to the
OFF position.
(2) Linear Relay Activation
1. Press and hold the LSB/USB key then turn the power on.
2. Turn the M.CH/VFO CH contro! to select menu number 16
on the display.
3. Press the UP key to turn the display on. The remote control
relay is now active.
4. Press the CLR key.
5. Adjust the linear amplifier according to its instruction
manual.
71