Page 2
Start by unpacking everything carefully. Make sure to cover the floor to prevent any damage or scratching (you can use the cardboard box for this). 1x table top 4x leg 1x wrench 17 16x nut M10 4x washer plate Diphano cannot be held responsible if the assembly instructions are not followed properly.
Page 3
POSITION THE LEGS Position the legs (B) onto the table top (A) by inserting the two pins into the pre-made holes.
Page 4
CONNECT THE LEGS Connect the legs (B) to the table top (A). To do this, position the washer plate (E) on the two pins and fixate by screwing the nuts (D) onto the pins, using the wrench key (C).
Page 5
TURN TABLE Turn the table carefully to its normal position with at least 4 people.
Page 6
attention DO NOT PRESSURE CLEAN DO NOT SIT ON THE TABLE...
& care NATURAL TEAK Simply brush away loose dirt, rinse, and clean with a mild, lukewarm soapy solution. Rinse thoroughly and pat dry with a cloth. If the teak is 100% dry and free of dust, you can apply our Teak stain protector to make it repellent to water and moisture.
Need help?
Do you have a question about the Natural and is the answer not in the manual?
Questions and answers