Bindicator Pulse Point II Series Installation & Operation Manual page 16

Figure 9. LP II Remote Enclosure with Cover Removed - STANDARD
Dip Switch SW1
Power & Ground
Connections
Notes:
1) For Safety, Properly Ground the Enclosure to an Adequate Earth Ground.
Figure 10. LP II Remote Enclosure with Cover Removed - ADVANCED
Power LED
Dip Switch
Power & Ground
Connections
Auxillary Relay
Connections
Earth Ground
Note 1
Main Relay
Connections
Earth Ground
Alarm LED
Test Button
Notes:
Main Relay
1) For Safety, Properly Ground the
Connections
Enclosure to an Adequate Earth Ground.
12
Remote Connection
Diagram
Note 1
Remote Connection
Diagram
www.bindicator.com
LVP180613 Rev. B