Tie-down points
This label shows the wheelchair's tie-down points. Read more
about wheelchair transportation on page 33.
Support wheels
This label indicates that you must not remove your support
wheels.
Conformance with ISO 7176–19
This label shows conformance with ISO 7176–19. See
4.6.2 Using the wheelchair as a seat in a vehicle.
ISO
7176-19
Dahl docking station
If your wheelchair has been equipped with a lock plate for Dahl
MK II or VarioDock, it will have this label. The lock plate is
installed underneath the wheelchair.
ISO
7176-19
Safety - 23