Epson EB-810E User Manual page 194

Input Signal Settings - Signal I/O Menu
Setting Options
HDMI Link Device
Connections
HDMI Link
Audio Out Device
Power On Link
Power Off Link
HDMI Out Power
Link
HDMI Out
Terminal End
Description
Lists the devices connected to the HDMI
ports.
Setting is only displayed when HDMI
Link is set to On.
Set to On to enable the HDMI Link
features.
Selects whether to output audio from the
internal speakers or a connected audio/
video system.
Controls what happens when you turn on
the projector or connected device.
• Bidirectional: automatically turns on
the connected device when you turn
on the projector, and vice versa.
• Device -> PJ: automatically turns on
the projector when you turn on the
connected device.
• PJ -> Device: automatically turns on
the connected device when you turn
on the projector.
Controls whether connected devices are
turned off when you turn off the
projector.
Turns on or off devices connected to
the HDMI Out port when you turn the
projector on or off.
Selects whether to use the projector as the
end projector.
Setting Options
HDBaseT Control
Communications
Extron XTP
Reset Signal I/O —
Settings
Description
Enables or disables communication
from the Ethernet and serial ports on
the HDBaseT transmitter or switcher;
turning on this setting disables the
projector's LAN and RS-232C ports.
Setting is only displayed when Extron
XTP is set to Off.
Set to On when you connect an Extron
XTP transmitter or switcher to the
HDBaseT ports. See the following Extron
Web site for more details on the XTP
system.
http://www.extron.com/
Resets all adjustment values on the Signal
I/O menu to their default settings.
194