Epson EB-810E User Manual page 74

Selecting an Image Source
• Press the button for the source you want on the remote control. If there
is more than one port for that source, press the button again to cycle
through the sources.
HDMI and HDBaseT sources (HDMI1, HDMI2, and HDBaseT ports)
A
USB port sources (USB-B port and external devices connected to the
B
USB-A ports)
Network source (LAN and Screen Mirroring)
C
• Press the [Home] button on the control panel or remote control.
Then select the source you want to use from the screen displayed.
• The display order of the input sources changes when the
projector detects an input signal. (The detected input source
appears in the upper left position.)
• A check mark appears on the image from the current input
source. You can check a preview of the current input image for
most sources as a thumbnail (other than the USB input source
in Content Playback mode).
74