Philco PCN 495 EX User Manual page 9

IF THE COOLING APPLIANCE IS LEFT EMPTY FOR A LONGER
PERIOD OF TIME, IT SHOULD BE SWITCHED OFF, DEFROSTED,
CLEANED AND DRIED AND THE DOOR SHOULD BE LEFT OPEN TO
PREVENT MOULD FROM FORMING INSIDE THE APPLIANCE.
ELECTRICAL SAFETY
1. THE POWER CORD MUST NOT BE LENGTHENED.
2. MAKE SURE THAT THE POWER PLUG IS NOT CRUSHED OR
DAMAGED.
A CRUSHED OR DAMAGED POWER PLUG MAY OVERHEAT AND
CAUSE A FIRE.
3. MAKE SURE THAT YOU CAN ACCESS THE MAIN PLUG OF THE
APPLIANCE.
4. DO NOT PULL THE MAIN CABLE.
5. IF THE POWER PLUG SOCKET IS LOOSE, DO NOT INSERT THE
POWER PLUG. THERE IS A RISK OF ELECTRIC SHOCK OR FIRE.
6. YOU MUST NOT OPERATE THE APPLIANCE WITHOUT THE
INTERIOR LIGHTING LAMP COVER.
7. THE FRIDGE IS ONLY APPLIED WITH POWER SUPPLY OF
SINGLE PHASE ALTERNATING CURRENT OF 220~240V/50HZ.
IF FLUCTUATION OF VOLTAGE IN THE DISTRICT OF USER IS SO
LARGE THAT THE VOLTAGE EXCEEDS THE ABOVE SCOPE,FOR
SAFETY SAKE, BE SURE TO APPLY A.C. AUTOMATIC VOLTAGE
REGULATOR OF MORE THAN 350W TO THE FRIDGE.
Copyright © 2020, Fast ČR, a. s.
EN - 7
Revision 08/2023