Table of Contents
Advertisement
Next, you will need to reset the
4
replacement camera. Lift the rubber
piece labeled SD/Reset. Using the
included reset pin, press and hold
the reset button until you hear a
voice prompt indicating the camera
is resetting.
NOTE:
The reset process may take up to 3 minutes.
5
After 3 minutes have passed or after
A
hearing the camera beep, click on
Wireless Add located on the Add Camera
screen. Your Wi-Fi NVR will now search
for new cameras.
B
NOTE:
The replacement camera will not appear
in the bottom screen with all other paired
cameras until the Wi-Fi NVR finishes the
process of finding and pairing the new camera.
Within the Wireless Add screen, the
6
"Connected Cameras" number signifies
those cameras that are already paired to
the Wi-Fi NVR and will not immediately
reflect this new camera.
NOTE:
You cannot exceed the number of Wi-Fi NVR channels you have. If you have a 4 channel system, the
maximum number of cameras you can have paired is 4.
Reset Pin
B
15
A
- Quick Links:
- Specifications
- Connecting Your System
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WNIP2 Series and is the answer not in the manual?
Questions and answers
Used NVR password reset on mother board
The Night Owl WNIP2 Series does not allow password resets directly from the Wi-Fi NVR. To reset the password, you must use the Night Owl Protect App. Download the app from the Apple App Store or Google Play Store, create an account if you haven't already, and follow the app's instructions for password reset.
This answer is automatically generated
@Mr. Anderson it says it will send me email but it's not my email I bought on eBay
I have a WNIP2 system at my work and the manager that set up our system is no longer employed here. I set up an account myself but when I try to add system, it tells me it's already exists. How can I get the system released from his user name so I can add it to mine?